Water Treatment

WATER TREATMENT WITH MPR - MULTI-PHASE REACTOR

Complus Systems Multi Phase Reactor is an Advanced Oxidation process that generates a suite of highly reactive Oxidizing radicals from the waste water stream without additional of chemicals or pre-cursor oxidizers.

Bio solids suspended in the wastewater stream undergo substantial particle size reduction by means of lysing of cellular matter and then subsequent oxidation of the reduced particles. This process is capable of achieving full sterilization of the water by this process alone. This will result in accelerated bio-reactivity of the solids entering the digestor, decreasing time for digestion.

Dissolved solids such as metal ions are reduced to oxidized state, where the metallic ion is tied to Oxygen rendering it insoluble. The insoluble material forms a solid precipitate that is removed via conventional filtration. Chlorides that were previously ionically bonded to the metal ions form Chlorine Dioxide and free Chlorine.

MPR - Produced Water Separation & Regeneration MPR - Waster Water Treatment MPR - Heavy Crude Oil Upgrading MPR - Car Wash water treatment MPR - Cooling Water Treatment

SUMMARY OF TECHNOLOGY

Multi Phase Reactor Advanced Oxidation Process

Modular and scalable with high volume production
Destroys and removes contaminates and microbes
Desalinates
Produces US EPA guideline drinking water from any source
Low maintenance
Field Tested and commercially proven
On-line monitoring and data logging

Electro-Chemistry

The Multi Phase Reactor generates an Advanced Oxidation reaction state within its reactor chamber by means of a proprietary cavitation, mixing, and ion exchange within the active reaction zone. The highly active reaction zone is capable of breaking down suspended solids, wet oxidizing volatile organic compounds, mineralizing dissolved metallic ions, and precipitating dissolved solids for subsequent particle separation.

APPLICATIONS

Municipal Wastewater Treatment

Water treatment with Bio-Solids

MPR treated biosolid loaded water break down the bio-solids reducing the solids
content in the effluent by up to 80%
- Proven to lower BOD and COD by 90 – 95%
- 85 – 90% Removal of Nitrogen
Break down of filamentatous bacteria and release of intracellular matter that

increases biological reactivity, reducing digestor exposure time to hours instead of

days.
Ozone is organically generated within the MPR is highly effective in sterilizing

influent. Remove competitive and hazardous biologics (bacteria, virus, and spores)

from entering digestor. Improved quality of clarified effluent and recovered solids.
Bio-Solids discharged from clarifier much lower in volume and classified as Class A,

suited for direct disposal.

Industrial Wastewater Treatment

Treatment of VOCs, TSS, TDS
- MPR cavitation and electro-chemistry provide perfect storm of advanced oxidation
  radicals that:
  - Wet Oxidation of VOCs, converting to products of combustion (high concertation of
    Advanced Oxidation species decomposes VOCs)
  - Expose TDS to oxidation species, converting to insoluble solids, e.g. Fe(+) to FexOy, H2S to
    SxOy, etc.
  - Raise ORP >300
- High Shear fractures long chain organics (hydrocarbons, pharmaceuticals,
  polymers, etc) and solids (minerals).

Desalination

Approach 1 – Desalination via physical chemistry

Cavitation and Electo-Chemical reaction to Oxidize TDS to insoluble mineralized
oxides
Halides no longer have corresponding (+) ion to associate with. Becomes Free
Chlorine, ClO2, other

Approach 2 – Vapor Distillation

Cavitation, exothermic reaction of VOCs, and Frictional heating raises water
temperature to boiling point.
High efficiency of heating – non-scaling
Flash distillation of water vapor
Vapor condenser pre-heat feed water.
Energy balance very favorable relative to other phase change processes.

Upgrading Heavy Crude Oil

MPR technology produces high shear in crude
- Frictionally heats oil
- Fractures long chain hydrocarbon
  - Creates C10 – C15 distillates
  - Permanently lowers viscosity, no further heating required for down stream processing.

Mud and Polymer Mixing

MPR technology produces high shear in crude
- Frictionally heats oil
- Fractures long chain hydrocarbon
  - Creates C10 – C15 distillates
  - Permanently lowers viscosity, no further heating required for down stream processing.

Aqueous Extraction with MPR

Proven high performance extraction with:
- Oils - CBD, Olive, Hops, Peppers
- Proteins - Chicken Biomass
Protein/Oils/Nutrient brought into solution by breaking cellular structure, not
necessarily cavitation which can cause radical formation in extraction
product.
Water extraction yields higher quality and purity, simple and low-cost
processing techniques
- No hydrocarbon solvents to extract
- No technical complexity with supercritical fluids
- Retain micro-nutrients lost via conventional extraction